Bronze CNC
machining services.

Sochain Precision provides custom bronze CNC turning and milling in Dongguan, China. Send a drawing for bushings, sleeves, thrust washers or wear plates. We review the alloy, stock form, critical fits and inspection requirements before quoting.

Machined bronze flanged bushing, grooved thrust washer and wear plate

Bronze machining capabilities

Round bronze bar stock with cut ends

Bronze parts and applications

Specify the mating part and working surfaces so we can review the features that control fit, motion and wear.

Bushings and sleeves

Define the finished bore, outside diameter and fit with the shaft and housing. State whether dimensions apply before or after installation.

Thrust washers

Mark the contact face, finished thickness and any lubricant grooves needed to distribute oil or grease.

Wear plates and guides

Identify the sliding face, mounting pattern and any flatness or surface roughness requirements.

CNC lathe boring the inside diameter of a bronze sleeve

CNC turning and milling

We review the stock form and geometry together, especially for thin walls, close fits and features that must align across setups.

  1. Turn the bore and outer diameters.CNC turning suits sleeves, flanges and other rotational features. Identify the datum for runout or position.
  2. Mill non-rotational features.CNC milling suits flats, slots, grooves and bolt patterns. Show where these features locate relative to the bore or mounting face.
  3. Define finish and edge breaks. Call out roughness on bearing faces and show which edges need a chamfer or deburring.

Bronze grades for CNC machining

C93200 is commonly specified for bearing and bushing applications. Compare C95400 or C86300 when strength and load drive the selection. Send the exact UNS grade and material standard for sourcing review.

Grade Typical applications What to confirm
C93200
Leaded tin bronze
Plain bearings, sleeves and bushings Check lubricant, shaft finish and fit. This grade contains lead. Flag any material restrictions in the inquiry.
C95400
Aluminum bronze
Wear plates and higher-load bushings Share the load, mating material and operating environment to guide grade review.
C86300
Manganese bronze
Heavy-load, low-speed bearings and bushings Confirm operating speed, load and lubrication method before specifying a bearing grade.

Grade properties and common uses are based on Wieland Concast alloy reference data. We confirm grade availability, stock form and certificate requirements with the quote.

Quality control and inspection

Agree on the dimensions and finish that affect assembly before machining starts.

  • Fits and datums. Identify the bore and outside diameter limits, datum references and whether you need runout measured.
  • Surface finish. Put roughness requirements on the actual bearing or sliding face and identify any surfaces that must remain as machined.
  • Reports. List the dimensions to record and any material certificate requests. Reporting scope is confirmed at quotation.
Bore gauge checking the inside diameter of a flanged bronze bushing

Critical dimensions and drawing requirements

Put fit, tolerance and surface finish callouts on the 2D drawing and share the CAD model for geometry.

Component Critical dimensions What to include
Press-fit bushing Bore, press-fit diameter, length Housing bore, shaft diameter and required fit. Identify the installed bore requirement if applicable.
Flanged sleeve Bore, flange thickness, shoulder location Seating face, datum axis and permissible runout.
Thrust washer Thickness, flatness, groove depth Working side and lubricant groove geometry.
Wear plate Face flatness, roughness, hole position Sliding direction, mating material and mounting details.

What to include in a bronze machining quote

Send the CAD model and drawing, exact alloy and standard, quantity, target delivery date and the inspection documents you need.

Request a quote

  • Material. List acceptable substitutes and any lead restrictions or certificate requirements.
  • Operating conditions. Share load, speed, mating material and lubrication details for parts that slide or rotate.
  • Critical dimensions. Flag tight fits, thin walls, surface roughness and which dimensions need a report.
  • Quantity. Include first order and expected repeat quantities if known.

Bronze machining FAQs

Material, fit and inspection questions to resolve before you order.

Which bronze grade is used for bushings?

C93200 is commonly used for plain bearings and bushings. For higher loads or specific corrosion requirements, compare suitable aluminum or manganese bronze grades using the actual service conditions.

Is C93200 lead-free?

No. C93200 is a leaded tin bronze. Share the applicable lead limit and approved material specifications so we can review sourcing with your quote.

Can I specify an oil groove in a bronze bushing?

Yes. Show the groove path, width, depth, feed hole and start or stop points on the drawing. Feasibility depends on tool access and wall thickness.

Should I specify bushing dimensions before or after press fit?

Identify the required supplied dimensions and any installed bore requirement separately. Press fitting can change the bore, so include the housing dimensions and fit in your inquiry.

What affects bronze CNC machining cost?

Alloy and stock availability, part size, setups, thin walls, tight fits and inspection scope all affect the quote. Send the part drawing and quantity for pricing.

Request a bronze machining quote

Send your drawing, grade and quantity. Flag the fits, working surfaces and reports that matter to your project.

Request a quote